(Hot Feed & Cold Feed)
EN-41. B Nitrated steel scroll having hardness approx. 58-59 RC. Upgraded lead design for maximum, constant output with minimum energy consumption.Barrel:
Seamless barrel housing steel fabricated double jacketed for water cooling or steam heating arrangement as per specific requirements with robust design for heavy extruder loads for trouble free operations.Liner:
En 41. B Nitrated steel liner having hardness approx. 58-59 RC.Bearing:
Heavy duty tapper roller thrust bearing provided in both end of barrels to bear up heavy extruder load.
Specifically designed under cut at feeder hopper area to ensure regulated material inflow and constant flow at the die face end. ( Feed roller on hot feed extruders offered only on request above 60 mm).Die Head Holder:
Removable threaded die head holder with hinged/ Fixed bolts. Clutch type, hinged type or hydraulic/ preumaticallyopenable die holders are also offered on request as option.Stand & Base:
Heavy duty steel fabricated monobloc constructed.Coupling:
Star type heavy duty coupling or directly coupled to the gearbox shaft with heavy duty ‘V’ belt transmission from motor to gearbox. As per standard design or requirement.Reduction Gear:
SHEL make special hollowed shaft, thrust bearing fitted on the output shaft, profile grounded/ soft series gear reducer units as standard or with separate bearing housing with extra heavy duty tapered/ thrust roller bearing coupled directly.
Screw- type rubber extruders manufactured by slachhydratecs are being used y the leading rubber processing companies in India and abroad, for over several years, been recogninsed as setting the benchmark in output and production quality . Depending on the application, SLACH can supply the right size of extruder: Cold feed (K3), Hot-feed (K2) extruders. The series also includes vacuum and pin-type extruders.
|SCREW DIA||L/O RATIO||RPM||DRIVE MOTOR||OUTPUT (kg/hr)|
|75/3 “||5/6||52-62||7.5 HP||40-55|
|100/4 “||5/6||42-48||10 HP/ 15 HP||65-130|
|125/5”||5/6||36-44||30 HP/40 HP||18-460|
|150/6 “||5/6||32-38||50 HP/60 HP||280-750|
|200/8”||5/6||28-36||60 HP 175 HP||400-1400|
|Cold Feed||DIA-MM||L/D||Drive Motor||Temprature Screw||Control Cylinder||Zone Die||Head||Output|
Other Sizes are offered only on request
*L/D Ratios Other Than Specified Are Also Offered On Request.
We reserve the rights to change/modify/upgrade to technical specification due to continuous R & D
Drop us a line